Quick Tips to Finding Hidden Piping and Valves
If you are a homeowner then you need to know the details of your home like the back of your hand. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.
In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. A second valve is usually located further down the line or where the gas pipe first enters.
If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Cold environments usually have the shut off points located in the house so that they do not freeze. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.